-
Al. Wojska Polskiego 63a
21-400 Łuków -
+48 506 061 433
biuro@rotomoulding-partner.pl
PRODUCTION
Production using a rotational moulding technology consists generally of four basic stages: filling a mould with plastic, thermal treatment, cooling, demoulding and machining. However, thanks to the solutions used in the technological line and the fact that it is equipped with a mill and a pulveriser, there is an additional stage in our company besides the elements typical of rotational moulding, namely the stage of recovering material unused in the production process. Thanks to this solution, our production is practically waste-free, and thus environment-friendly.
1
Filling a mould with plastic
The first stage of production is filling a mould with plastic in the form of thermoplastic powder, usually polyethylene, either in natural form or with admixtures of colours or other additives as well as elements to be embedded in the plastic, all that depending on product requirements. Then the product mould is closed by operators and entered into a furnace; at this stage, the mould already rotates in two perpendicular planes.
2
Thermal treatment
The mould is heated up to the temperature at which the powder in the mould becomes liquid. During this process, the mould is constantly rotated along two perpendicular axes. Properly selected heating time, temperature and speed of the mould rotation ensure even distribution of the liquid material inside the mould, giving the desired product shape. After this process, the mould leaves the furnace to start the cooling process.
3
Cooling
The constantly rotating mould is cooled by air, thanks to which the plastic solidifies in the mould, and the continuous rotation of the mould causes that the material doesn’t settle in an undesirable manner, thanks to which the product achieves the required thickness and uniformity on the entire surface. The important elements that affect the length of cooling are the product size and the required thickness of its walls.
4
Demoulding and machining
Once the mould has been cooled, it is dismantled by the operators, and the product is removed and carefully machined to remove excess material using specialized tools dedicated to the processing of plastic products. A machine operator checks and cleans the mould, and then they can proceed with refiling it, thanks to which the cycle can be repeated.
5
Material recovery
The material that remains after the processing is transferred to a special mill for grinding plastics. Thanks to correctly profiled knives, this mill processes the delivered material at a speed of 1600 kg/h into even flakes with a diameter of 6 mm. Then the material so processed is transferred to a pulveriser, which further processes it and grinds the material to form a powder with a grain diameter of about 500 microns, so we can use it as an additive in further production.
ECONOMY, HIGH QUALITY, AND FUNCTIONALITY.
CHOOSE TO PARTNER WITH ROTOMOULDING PARTNER
Rotomoulding, as a method of processing plastics, has been known in Poland for many years, but it is only now reaching the peak of its popularity. Several undeniable benefits of this type of production allow it to significantly outdistance other techniques for creating popular elements, including products of various shapes and sizes. Take advantage of the services offered by Rotomoulding Partner. We are characterized by years of experience, access to our own technological facilities, and a qualified team of employees. Modern rotational molding production holds no secrets for us. Are you looking for cost-effective ways to produce polyethylene components? Would you like such products to withstand the test of time and serve you for many years to come? Feel free to contact us. Verify our professionalism and join the ranks of satisfied clients!
English 
Polish